Who leads Reddy Compressors
D. Srinivas Reddy is the Managing Partner and decision maker for Reddy Compressors and Reddy Generators. The business has served industry since 2002 from Tarnaka, Secunderabad, selling, renting and servicing compressors and supplying spare parts for many makes, with service teams across Telangana and Andhra Pradesh and supply across India.
As a service engineer and domain specialist, he personally reviews the technical content the business publishes and the engineering behind major proposals. That matters to customers because it means the person accountable for the business is also the person checking whether the pressure, flow, treatment and duty assumptions behind a recommendation are correct.
Leadership that starts with operating reality
Customers rarely experience a compressor the way it appears in a brochure. They experience it as a machine that must start on a hot morning, pressure that must hold through a production shift, diesel or electricity that must be paid for, a spare part that must fit first time, and a project programme that keeps moving whether the air is ready or not.
That reality shapes how the business is run. A technically advanced compressor selected for the wrong duty is still the wrong compressor. A cheaper machine that burns excess power for ten years is not economical. A quick repair that clears an alarm without finding its cause is not a successful repair. A larger compressor installed to make up for poor distribution is not good engineering. The machine is important, but the operating outcome is more important.
Eight principles we work by
| Principle | What it means in practice |
|---|---|
| 1. Ask before recommending | Establish pressure, application, duty cycle, site and air quality before naming a machine |
| 2. Respect engineering reality | Physics, not sales language, decides whether the air reaches the tool at the right pressure |
| 3. Build for the lifecycle | Judge equipment on running cost, serviceability and parts support, not purchase price alone |
| 4. Find the root cause | Repair the reason for a fault, not only its symptom |
| 5. Evidence before assumption | Measure when the decision depends on actual system behaviour |
| 6. Make claims that can be defended | Say what is known, flag what needs confirming, and never invent figures |
| 7. Safety first | Treat compressed air as stored energy and plan work accordingly |
| 8. Keep learning | Use every job’s findings to make the next decision better |
Ask before recommending
A request for “500 cfm” does not yet tell us enough. The right recommendation also depends on operating pressure, the application, simultaneous demand, running hours, site conditions, hose or pipe length, air quality, whether the machine must be mobile, and whether diesel or a reliable grid supply is available. Asking these questions is not a complication; it is the simplest way to avoid an expensive selection error.
Respect engineering reality
Marketing cannot change physics. A compressor cannot deliver useful air at the point of use if piping and filters consume the available pressure. A receiver stores air; it does not create compressor capacity. A choked filter is a restriction whatever its brand. A variable-speed drive saves energy only where demand varies. An oil-free compressor still needs a dryer and filtration to meet a demanding air class. Keeping these facts visible protects the customer from decisions that look good on paper and fail on site.
Build for the lifecycle
A compressor’s purchase price is usually a small part of what it costs over its working life; energy and maintenance tend to dominate. Leadership therefore looks at the whole path from selection, installation and commissioning to operation, maintenance, overhaul and eventual replacement. Raising the set point by one bar costs about 7% more power, and that cost recurs every hour the plant runs.
Find the root cause
Repeated high-temperature trips, low pressure or water in the lines usually have a cause that sits outside the obvious component. A high discharge temperature may come from a blocked cooler, poor room ventilation, a failed thermostatic valve or degraded oil. Normal discharge on an oil-injected screw is typically about 75–95 °C; when it climbs, our engineers look for the reason before replacing parts.
Evidence before assumption
Where a decision depends on how the system actually behaves, a few days of pressure, power or load logging is cheaper than a wrong purchase. We measure where it matters and say plainly when a figure is an estimate.
How the principles show up in each part of the business
Sales: new and used equipment
We sell new and used or refurbished compressors of many makes. The selection starts from free air delivery at the required working pressure, under site ambient conditions, with sensible margin. For long-term projects we can supply brand-new machines to site. A used machine is offered on its actual condition, not just its model name.
Rental: temporary air as a utility
Our own rental fleet spans 50–2,000 cfm and 2–30 bar (29–435.1 psig), diesel and electric. A hire machine is treated as part of the customer’s production or project, so it comes with the hoses, aftercoolers, separators or dryers the duty needs and, where required, operators. On hire jobs we service machines every 300 running hours, including the oil change.
Service: diagnosis before replacement
Over 20 service engineers and technicians cover Telangana and Andhra Pradesh. The standard is to diagnose before replacing, record what was found, and check the operating condition after the work.
Spare parts: identification before supply
Parts are identified from the machine using make, model, serial number, a nameplate photograph and, where possible, the old part. Fit is confirmed before quoting. A part that looks similar is not necessarily the correct part.
Multi-brand leadership and honest relationships
Indian plants and project sites are rarely single-brand. A factory may run an ELGi screw, an older Ingersoll Rand piston machine, a KAESER dryer and an Atlas Copco portable on a contractor’s site next door. Reddy Compressors sells, rents and services machines of ELGi, Atlas Copco, Ingersoll Rand, KAESER, Chicago Pneumatic, Sullair, Doosan, Kirloskar and others as an independent specialist. We are not an authorised dealer or distributor of these manufacturers, and the leadership position is that this must always be stated plainly. We have tie-ups with all major and reputed brands. Brand names and trademarks belong to their owners.
Independence is a responsibility as well as an advantage. It allows us to recommend the technology that suits the duty, and it obliges us to be precise about what we can and cannot supply for a given make and model.
Experience behind the leadership
Our projects have been delivered by our team across Reddy Generators and Reddy Compressors. They include a temporary power-and-air package for an international oilfield-services contractor on a natural-gas development at Kakinada, with compressors rated up to 1,100 cfm at 300 psig (20.7 bar), generators, distribution boards, operators and a technician on site. They also include round-the-clock diesel compressor hire at a steel plant in Andhra Pradesh with operators on 12-hour shifts, and compressor and generator hire for power-plant and infrastructure contractors in Karnataka and elsewhere.
Alongside compressors, Reddy Generators carries out ongoing maintenance work for power utilities, including generator and fire-fighting engine maintenance at transmission substations. The discipline is the same: equipment that must work when it is needed.
Safety as a leadership responsibility
Compressed air is stored energy. Receivers, hoses and pressure tests can cause serious injury if handled carelessly. Leadership sets the expectation that machines are isolated and depressurised before work, that hose whip restraints and correctly rated couplings are used on site, that safety shutdowns such as high discharge temperature, low engine oil pressure and high coolant temperature are never bypassed, and that pneumatic pressure testing follows the client’s or engineer’s approved procedure.
How Reddy Compressors helps
When you contact Reddy Compressors, the conversation follows these principles. We ask what the air must do, check what can be checked, recommend the configuration that fits, and support it with service, AMC, breakdown repair, overhaul, air audits and identified spare parts. We work across many brands from our office at Srinilayam, 12-13-200, First Floor, Street No. 1, Tarnaka, Secunderabad 500017, with service across Telangana and Andhra Pradesh and supply across India.
Call +91 99590 60718 or +91 92468 88812, WhatsApp +91 99590 60718, or email reddycompressors@gmail.com.
What to send us
- The application and the equipment or process the air supplies.
- Required pressure in bar or psig, and estimated flow in cfm or m³/min.
- Running hours and whether the demand is steady or intermittent.
- Existing compressor details with a nameplate photograph.
- Site location, power or diesel availability and any air-quality requirement.
- For a problem: the symptom, any fault code and when it began.
Frequently asked questions
Who runs Reddy Compressors?
Reddy Compressors is led by D. Srinivas Reddy, Managing Partner, who is also the decision maker for Reddy Generators. The two businesses share the same management. He is a service engineer with more than two decades of experience in compressed air and industrial power, and he reviews the engineering behind the business’s published content and major proposals himself.
Are Reddy Compressors and Reddy Generators the same company?
They are separate businesses under the same management. Reddy Compressors handles compressor sales, rental, service and spare parts, while Reddy Generators handles generator sets. Because they are managed together, a site that needs temporary air and temporary power can be supported in a coordinated way, as on our past projects that combined compressors, generators and distribution boards.
Is Reddy Compressors an authorised dealer for any compressor brand?
No. We are an independent multi-brand specialist. We sell, rent and service machines of ELGi, Atlas Copco, Ingersoll Rand, KAESER, Chicago Pneumatic and other makes, but we are not an authorised dealer or distributor of these manufacturers. We state this plainly so that customers know exactly what relationship they are dealing with.
How long has Reddy Compressors been in business?
Reddy Compressors has served industry since 2002 from Tarnaka, Secunderabad. Over that time the business has grown from equipment supply and service into a multi-brand operation with its own rental fleet, more than 20 service engineers and technicians, service across Telangana and Andhra Pradesh, and supply of compressors, rentals and spares across India.
Can I speak directly to someone senior about a large project?
Yes. For large or unusual requirements, such as multi-machine temporary air packages, high-pressure drilling air or combined power-and-air supply, the Managing Partner is involved in reviewing the engineering. Call +91 99590 60718 or +91 92468 88812 with an outline of the duty, location and timescale, and we will arrange the discussion.
Related pages
Technical content reviewed by D. Srinivas Reddy, Managing Partner and service engineer, Reddy Compressors. Last updated 7 November 2026. How our engineering content is reviewed.